Contact us

Tel:13240775093

Fax:13240775093

Email:anna.theone.lyw@gmail.com

MSN:anna.theone.lyw@hotmail.com

Add:The 9th building of Tongfuyu Xufa Industry Park,Shangcun,Gongming Town,Shenzhen City,China

Bitmain Antminer D3 15GH/s – NEW

Item No.: 2793
Size: Bitmain Antminer D3 15GH/s – NEW

Product Description

Bitmain Antminer D3 15GH/s 

 

1. Specifications of the Antminer D3 are as follows:
a) Hash rate: 15 GH/s (Variation of ±5% is expected)
b) Power consumption: 1200W (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temp).
c) Dimensions of the miner: 320*130*190mm
d) Hashing algorithm: X11

3. Bitmain recommends use of the APW3++ PSU with the Antminer D3. One APW3++ PSU can not power more than one Antminer D3.

5. We advise you to research and prepare in advance for the customs’ clearance in your country to avoid delays or unexpected costs.

7. Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the PCIE connectors are connected to power supply.

1. A 180-day warranty is provided starting from the date shipment delivered

2.Within warranty period,u will enjoy Free repair/replacement service.

3.Before shipping,every single product will be tested before shipped out

4.After-sale support,technical support and repairing service are available for the full-life of the miner.

Notes:

Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.

PSU: A power supply unit is not included. You will need an ATX PSU with at least 9 six-pin PCIE connectors. There are 2 PCI-e connectors for +12V DC input on each hashing board and all 2 are required. Do not connect more than one PSU to the same hashing board!

We recommend the APW3 ++ power supply for use with the Antminer D3 15GH/s. One power supply supports one Antminer D3 15GH/s.

Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 9 PCIE connectors are connected to power supply.